Threading Technology – Clamping Technology 520

650 Tap Holders Soft- synchro Speed- synchro KSN MQL SFM HF EM Accessories Tech. Info Product Finder 7.11 Length adjustment of collet holders type PGR Tool 1. Pick up collet holder 2. Insert pre-adjustment tool in the collet holder 3. Insert collet into pre-adjustment tool 4. Insert tool into collet 5. Adjust tool length by turning the adjusting wheel Attention: Observe min./max. clamping length for tool shanks 6. Measure overall length, deduct 100 mm from the overall length measured with pre-adjustment tool 7. Remove pre-adjustment tool 8. Press in tool using the clamping unit 4. Collet 3. Pre-adjustment tool 100 mm 2. Collet holder Adjusting wheel