Threading Technology – Clamping Technology 520

Warranty EMUGE Corp. warrants to original equipment manufacturers, distributors and industrial users of its products that each new product manufactured or supplied by EMUGE Corp. shall be free from defects in material and workmanship. EMUGE Corp.’s obligation under this warranty is limited to furnishing without additional charge a replacement, or at its option, repairing or issuing credit for any product which shall within one year from the date of sale be returned freight prepaid to the location designated by an EMUGE Corp. representative and which upon inspection is determined by EMUGE Corp. to be defective in materials or workmanship. Complete information as to operating conditions, machine setup, and application of cutting fluid should accompany any product returned for inspection. The provisions of this warranty shall not apply to any EMUGE Corp. product which has been subjected to misuse, improper operation conditions, machine setup or application of cutting fluid or which has been repaired or altered if such repair or alteration in the judgment of EMUGE Corp. would adversely affect performance of the product. This warranty is in lieu of all other warranties, express or implied, including any implied warranty of merchantability or fitness for a particular purpose. EMUGE Corp. shall have no liability or responsibility on any claim of any kind, whether in contract, tort or otherwise, for any loss or damaging arising out of, connected with, or resulting from the manufacture, sale, delivery or sue of any product sold hereunder, in excess of the cost of replacement or repair as provided herein. In no event shall EMUGE Corp. be liable for any special, incidental or consequential damages. EMUGE Corp. makes no other warranty, express or implied, except as set forth above, and EMUGE Corp. neither assumes nor authorized any other person or entity to assume for it any other obligation or liability in connection with any of its products. Warning • Any cutting tool may break or shatter if improperly used. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use. • Grinding of taps or dies may produce hazardous dust and should only be done under established safety guidelines. • Tapping fluids may contain hazardous materials. Always consult the appropriate material safety data sheets before the use of any EMUGE products. Notice Because we are constantly engaged in a program of product improvement, tool specifications are subject to change at any time. All EMUGE Corp. terms and conditions are subject to change without notice. Terms & Conditions

RkJQdWJsaXNoZXIy NjMxNTU=