Threading Technology – Clamping Technology 520

577 = In stock = Allow 7 days for delivery Soft- synchro Speed- synchro KSN MQL SFM HF EM Accessories Tech. Info Product Finder Bolt On Shanks for HF Tapping Attachments For Type Shank Size inch L 2 Weight (lbs) EDP Number HF 20 MT 4 1.3386 3.74 F033201.04 MT 5 1.2598 6.16 F033201.05 MT 6 1.2205 10.56 F033201.06 HF 30 MT 5 1.1811 8.58 F033301.01 MT 6 1.2598 13.64 F033301.02 For Type Shank Size inch L 2 Weight (lbs) EDP Number HF 20 SK 40 0.8661 3.74 F033205.12 SK 50 0.7087 6.60 F033205.11 HF 30 SK 50 0.7480 9.46 F033305.03 SK 60 0.7480 22.22 F033305.04 For Type Shank Size inch L 2 Weight (lbs) EDP Number HF 20 CAT 50 2.6142 8.38 F033207.02 HF 30 CAT 50 2.0079 12.79 F033307.01 For Type Shank Size mm L 2 Weight (lbs) EDP Number HF 20 SK 50 66 8.38 F033206.02 HF 30 SK 50 51 12.79 F033306.01 Available with internal coolant supply up to 145 psi (10 bar) upon request 1) The “Keeper key slot” shown here is to DIN 228 B specifications and is different than ANSI B5.10 and ANSI B5.40. The taper shank will fit into Morse Taper Shank spindles, however the “Keeper key slot” is dimensionally different from the American Standard. “Keeper key slot” to ANSI B5.10 or ANSI B5.40 standards are available on a special order basis. Available with internal coolant supply up to 145 psi (10 bar) upon request Available with internal coolant supply up to 145 psi (10 bar) upon request L 2 L 2 Keeper key slot 1) L 2 L 2 KSN Morse Taper Shank DIN 228 B (ASME B5.10) KSN SK Shank ANSI B5.18, NMTP HF CAT Shank ASME B5.50, UNC drawbolt thread HF SK Shank DIN 69871 A